Stove Installation Dundee & Scotland 🏴

A complete installation normally begins with a property survey and appliance specification before the chimney, flue route, hearth, ventilation and installation details are finalised.

The Hot Box ® process typically includes:

Survey

We assess the existing chimney or proposed twin-wall route, fireplace or appliance position, room characteristics, hearth requirements, ventilation and other property-specific considerations.

A detailed survey helps identify potential issues before work begins and provides the information required to develop an appropriate specification.

Appliance Sizing

The correct stove output depends on much more than room volume. Insulation, glazing, ceiling height, room layout, heat loss and how the space is used all influence appliance selection.

Oversizing can lead to poor operating patterns and reduced combustion quality, while an undersized stove may struggle to provide the desired heat output.

You can explore suitable appliances in our Stoves Overview Hub.

Chimney or Twin-Wall Flue Design

Where an existing masonry chimney is suitable, a flexible liner may form part of the installation. Where no usable chimney exists, a twin-wall insulated system can provide an alternative route.

The final flue arrangement must be compatible with the appliance and designed around safe clearances, support, termination, access and reliable draught.

Explore our Wood Stove Services Scotland hub for further technical information.

Ventilation & Combustion Air

Safe combustion depends upon suitable air provision. We assess the property and appliance requirements and identify whether dedicated ventilation or direct-air provision is required.

Hearth & Fireplace Specification

The hearth and surrounding construction must be compatible with the chosen appliance. Material, dimensions, thickness, clearances and fireplace detailing are considered as part of the installation design.

Installation

The stove, flue system, hearth and associated components are installed in accordance with the agreed specification, manufacturer instructions and applicable standards.

Testing & Commissioning

The completed installation is checked and commissioned before handover, with operation and maintenance requirements explained to the homeowner.

Documentation

Appropriate installation and commissioning documentation is provided following completion.

Stove Installation Pricing Guide

The cost of installing a wood burning stove varies considerably depending on the property, chimney condition, chosen appliance, flue arrangement, access and any supporting fireplace or building works.

• Using an existing suitable chimney: approximately £1,300–£2,350
  Typically applicable where the chimney and fireplace arrangement are relatively straightforward and limited additional work is required.
• Chimney reline and stove installation: approximately £2,350–£3,900
  Common in older properties where a new flexible stainless-steel liner and related components are required.
• Twin-wall installation with no existing chimney: approximately £3,250–£5,850+
  These installations normally involve more components, support systems, weathering and labour.

Important Notes

• These figures are guides only and should not be treated as quotations.
• The final price depends upon the appliance, flue route, access, hearth, fireplace works and condition of the existing property.
• A professional home survey provides the best basis for an accurate specification and quotation.
• Quality components and correct installation should be considered alongside headline cost.

For clean and simple ignition after installation, discover Hot Box ® Firestarter.

Planning & Scottish Building Standards

Many stove installations can be completed without a separate planning application, but this depends on the property and the nature of the proposed work.

Additional consideration may be required where the property is listed, lies within a conservation area or involves a new external chimney or flue arrangement.

• Listed Buildings: alterations affecting protected fabric or appearance may require listed building consent.
• Conservation Areas: externally visible work can require additional consideration.
• External Flues: the location, height and visibility of a new flue can affect planning requirements.

Scottish Building Standards requirements remain relevant irrespective of the planning position. We review the proposed installation route during the survey and advise where further approval or specialist advice appears necessary.

Twin-Wall Chimney Systems

Yes. A property does not necessarily need a traditional masonry chimney to accommodate a wood burning stove.

A properly designed twin-wall insulated chimney system can provide a dedicated flue route internally or externally, subject to the property layout and installation requirements.

The route must be designed around safe clearances, support, termination, weathering, structural fixing and future maintenance access.

Explore our Twin-Wall Chimney Systems page.

Smoke-Control Areas & Appliance Selection

Smoke-control restrictions apply in parts of the UK, and the permitted appliance and fuel arrangement depends upon the location and current rules.

Where appropriate, we can specify a DEFRA-exempt appliance designed for use in smoke-control areas when burning permitted fuels in accordance with the appliance conditions.

We review this as part of the stove-selection process and can recommend suitable appliances from our DEFRA Approved Stove range.

Choosing the Correct Stove Output

Rules of thumb based on room volume can provide a rough starting point, but they are not a substitute for proper appliance sizing.

Heat loss is influenced by insulation, glazing, construction, ceiling height, adjoining spaces, ventilation and the temperature you want to maintain.

We therefore consider the actual property before recommending a stove rather than relying solely on a generic kilowatt calculation.

Hearths, Clearances & Fireplace Detailing

The required hearth construction depends upon the appliance and installation arrangement. Some appliances may be suitable for a thinner decorative hearth, while others require a more substantial construction.

Clearances from the stove and flue components to combustible materials must also follow the relevant appliance and system requirements.

We coordinate the hearth, recess and stove position so that compliance and appearance are considered together.

Typical Installation Timescales

Timescales vary depending on the appliance, property and amount of preparation required.

• Simple stove replacement: approximately 1 day
• Installation with chimney relining: approximately 1–2 days
• Twin-wall chimney installations: approximately 2–4 days

Fireplace alteration, plastering, hearth construction, specialist access or other associated works may extend the programme.

Stove Maintenance & Chimney Sweeping

Regular chimney sweeping and routine stove servicing help maintain safe operation, combustion performance and appliance condition.

Servicing can include inspection of components such as door seals, baffles, firebricks, controls and other wear items, while sweeping removes deposits and checks the flue route remains clear.

Explore our stove servicing Dundee service and chimney-care information.

Retail, Installation & Aftercare from One Team

Hot Box ® Dundee combines stove retail with technical installation expertise. This allows us to manage the appliance, fireplace and flue system as one complete installation rather than treating them as separate purchases.

• HETAS-Registered Engineers: professional installation and commissioning
• Premium Stove Selection: carefully curated British and European brands
• Flue Design: flexible liners and twin-wall systems specified around the property
• Fireplace Works: hearth and recess preparation where required
• Showroom Support: see appliances and discuss your project before purchase
• Aftercare: servicing, chimney sweeping and ongoing support

For homeowners in Dundee and across our wider Scottish service area, the result is a simpler route from deciding you want a stove to having a complete working installation.